Molding products 1

Brand Millwork Corporation

Millwork, Moldings, and Dimensional Domestic Woods

Molding Products

Molding Products / Millwork Products/ Wood Products / Home / Contact Us / About Us

Here you will find our molding designs. We have a nice variety of styles to choose from, click on the highlighted names and take a look.

Click on one of the following to go to that section: casing, base, plinth, rosettes, and misc. Then click on the catalog number to go to the price list page. The price list page will have all the species of wood available and the prices. Moldings are sold in 8ft. lengths and prices are listed for that length. For 10 and 12 ft. lengths ( shipped freight ) please use comment section of quote request to add catalog number and description of molding, then check mark length wanted and quantity then submit, we will contact you within 24 hr. with total cost including shipping.

Any combination of casing, rosette, plinth block, and baseboard is your choice, I do however offer some suggested matches:

** The colonial WP356 casing , and WP 445 Base **

** The ranch WP307 casing , and WP 691 Base **

** C880 casing , with rosette CT1201, or CT1220 , the 8471 plinth , and 8462 base **

** C876 casing , with rosette CT1221 , or CT1200 , the 8474 plinth , and 8475 base **

** ARCH8289 casing , with ARCH8477 plinth , and ARCH8478 base **

** 16570 casing , with CT1202 rosette , the 8458 plinth , and 8426 base **

Casings

Price List Page

Dimensions Catalog #

2 1/4 x 5/8 WP 356

2 1/4 x 5/8 WP 307

3 3/8 x 5/8 C880

4 3/8 x 3/4 C876

4 3/8 x 3/4 ARCH 8289

5 3/8 x 3/4 16570

Back to top

Rosettes

Price List Page

3 5/8 x 3 5/8 x 3/4 CT 1201

3 5/8 x 3 5/8 x 3/4 CT 1220

4 5/8 x 4 5/8 x 1 CT 1200

4 5/8 x 4 5/8 x 1 CT 1221

5 5/8 x 5 5/8 x 1 CT 1202

Back to top

Plinth Blocks

Price List Page

Plinth blocks go at the base of casing on the floor at doorways. The baseboard attaches to one side of the plinth block.

Plinth blocks will be delivered as a two piece configuration consisting of a 2 inch cap on top of a plain board (can be attached by nailing or biscuit joining). For example an Oak 8471plinth block is a 3 7/8" wide x 2" tall x 1 1/16" thick cap sitting on a 3 7/8" wide x 5 1/8" tall x 1 1/16" thick piece of Oak.

3 7/8 x 7 1/8 x 1 1/16 8471

4 7/8 x 8 3/4 x 1 1/4 8474

4 7/8 x 8 3/4 x 1 1/4 Arch 8477

5 7/8 x 9 1/8 1 1/4 8458

Back to top

Baseboards

Price List Page

Baseboards are a two piece configuration consisting of a molded cap on top of a plain board. As mentioned above in the plinth block section the cap needs to be attached to board by nailing or biscuit jointing.

(colonial) 3 1/4 x 5/8 WP 445